ASTM A179 carbon steel tube for engineering and machine structural use

Our quality control department will do inspection for details of the steel materials ASTM A179 carbon steel tube before delivery. We would invite the customer side to attend the inspection together. If they can not come, we will also take rich pictures for them to check. Meanwhile, we will publish inspection report and send them the PDF version. Besides, we accept any third party inspection such as SGS, BV, etc. And our quality control department will support the third party to inspect the steel materials smoothly and try our best to deliver the qualified steel materials to customers earlier.

The main uses of flat steel are as follows. First, flat steel is used as a raw material for processing steel plates, which is convenient for transportation, takes up a small space, and can save transportation costs. Second, ASTM A179 carbon steel tube flat steel can be used as raw material for processing welded pipes. Flat steel can be a finished steel product, or it can be used as a billet for welded pipes and thin slabs for stacked sheets. Third, flat steel can be directly used as a steel structure. As a finished material, flat steel can be used for making hoop iron, tools and mechanical parts, and used as building frame structure and escalator in construction. Fourth, the flat steel has a smooth surface and a certain degree of beauty.

The chemical composition of 20CrMo steel pipe is 0.17-0.24, Si: 0.17-0.37, Mn: 0.40-0.70, Cr: 0.80-1.10, Mo: 0.15-0.25. Mechanical properties of 20CrMo steel pipe: tensile strength 410 Mpa; yield strength: 265mpa; elongation after fracture: 24; reduction of area: 60; impact absorption energy: 110J. 20CrMo steel pipe belongs to alloy structure steel pipe, which has high thermal strength, good high-temperature strength, good machinability, medium cold bending plasticity, high hardenability and good welding performance at 500-520℃. ASTM A179 carbon steel tube, 20CrMo steel pipe is generally used in quenching and tempering state.

When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.