What is a656 grade 50 material properties equivalent steel in EN standard

We are world class steel a656 grade 50 material properties materials supplier. We are engaed in providing raw steel materials such as steel plates / steel coils / steel sheets / steel pipes, deep processing and a series project design and solutions to clients. We guarantee to return goods for free for a656 grade 50 material properties quality problem during its lifetime. Your satisfactory is our permanent pursue. We always welcome advise from clients to make self-improvement continously. And sincerely to build long-term cooperation with you.

SM490A steel plate is a low-alloy high-strength steel. It is a structural steel produced in accordance with Japanese standard JIS G3106. Its strength σb is 490MPa. It is mainly used for buildings, bridges, ships, rail vehicles, petroleum storage tanks, containers and other buildings that require advanced weldability. a656 grade 50 material properties, JIS SM490A steel sheet delivery status: steel plates with a thickness of <80mm, the delivery state is hot-rolled; steel plates with a thickness of ≥80mm, the delivery state is normalized condition.

Pipeline steel can be divided into three types: high cold, high sulfur area and submarine laying. According to the development trend, service conditions, main failure forms and failure reasons of oil and gas pipelines, it is required that the pipeline steel a656 grade 50 material properties not only has good mechanical properties, but also has negative temperature resistance, corrosion resistance, seawater resistance and hsscc resistance. These pipelines with bad working environment have long lines and are not easy to maintain, so they have strict quality requirements.

The microstructure of the quenched and tempered alloy steel, a656 grade 50 material properties after conventional heat treatment is tempered sorbite. For parts with wear-resistant surface (such as gears and spindles), induction heating surface quenching and low-temperature tempering are carried out, and the surface structure is tempered martensite. The surface hardness can reach 55HRC-58HRC. After quenching and tempering, the yield strength of quenched and tempered alloy steel is about 800MPa, the impact toughness is 800kJ / m2, and the core hardness is 22HRC - 25HRC. If the cross-section size is large but not quenched, the properties will be significantly reduced.

P235GH steel material number under EN10028-2:2003 standard is 1.0345. This steel is a European pressure vessel steel. P235GH Mechanical properties: Tensile strength σb (350 ~ 480 MPa); Yield strength σs(215 MPa min.); Elongation ≥25%; Brinell hardness ≤105 ~ 140. a656 grade 50 material properties, P235GH steel chemical composition (mass fraction,%): ≤0.16 C; ≤0.35 Si; 0.60 ~ 1.20 Mn; ≤0.025 P; ≤0.010 S; ≤0.30 Cr; ≤0.30 Ni; ≤0.30 Cu; ≤0.08 Mo; ≤0.02 V; ≤0.02 Nb; ≤0.012 N; ≤0.020 Al; ≤0.03 Ti.

The steel plate, steel pipe and other steel materials are the important material in the material engineers. Our company will provide the high quality the steel plate, steel pipe and other steel materials for you. We are exported the steel plate, steel pipe and other a656 grade 50 material properties steel materials to the customers from USA, South America, Europe, Africa etc. If we can have the good cooperation together, you will be very welcome to be our agent in your local market. Let’s work together!

The after-sales service department will pay return visit to each customer by call or email, report problems found during the return visit in time, and discuss with the production and quality inspection center to propose effective solutions and follow up in a timely manner, so as to ensure the benefits each customer are fully guaranteed, and to provide customers with more value-added services.