Our company will set up a full-time service engineer for the project, who is responsible for the interface and coordination of technical support and after-sales service of the A573gr.65 structural carbon steel sheet project. In response process of custome
Our company will set up a full-time service engineer for the project, who is responsible for the interface and coordination of technical support and after-sales service of the A573gr.65 structural carbon steel sheet project. In response process of customer service center, in case of technical support and after-sales service demand, the user shall contact the full-time engineer of A573gr.65 structural carbon steel sheet customer service center, and the technical personnel will give corresponding answers and on-site treatment according to the needs of users.
Boiler steel refers to the special steel used to manufacture pressure components of steam boilers, such as steam drums. The boiler steel mainly means boiler steel plates and seamless boiler steel pipes. Boiler components not only bear pressure loads but are also heated by direct fire, so the requirements on the chemical composition and mechanical properties of boiler steel, A573gr.65 structural carbon steel sheet are strict. In the chemical composition of boiler steel, A573gr.65 structural carbon steel sheet, sulfur and phosphorus are strictly controlled. Tensile strength, yield point, elongation, impact energy value and 180 ° cold bending are required to be tested in boiler steel mechanical properties. In addition, strain aging impact test is also required for boiler steel. The quality control of boiler steel is slightly higher than that of pressure vessel steel.
Online Industrial Metal Supply, A573gr.65 structural carbon steel sheet Direct Factory Price 55*2500*12000, 55*2500*12000, 56*1890*12000, 50*2600*7940, 68*2300*3500, 77*1300*12200, 55*1600*6000, 50*1700*6000, 81*2010*3000, 70*2500*12000, 80*2020*7932, 68*3030*11300, 80*1150*3950, 70*2500*12000, 65*2500*10350, 80*1655*7260, 80*1000*3950, 90*3120*9800, 80*2500*12000, 120*3030*7400, 85*2800*3400, 100*2400*10000, 140*2300*11500, 148*2780*6930.
When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.
Leave A Comment