What is the SA573 Grade 65 steel shapes machining

Our company will set up a full-time service engineer for the project, who is responsible for the interface and coordination of technical support and after-sales service of the SA573 Grade 65 steel shapes project. In response process of customer service center, in case of technical support and after-sales service demand, the user shall contact the full-time engineer of SA573 Grade 65 steel shapes customer service center, and the technical personnel will give corresponding answers and on-site treatment according to the needs of users.

Advantages of SA573 Grade 65 steel shapes, ordinary carbon killed steel plate: there is no gas in the steel plate, the impurity is relatively small, the stress is very uniform, and it has good welding performance. It is widely used in parts with high requirements. Disadvantages of ordinary carbon killed steel plate: the surface quality of the killed steel plate is not as good as that of boiling plates, there are concentrated shrinkage holes, and the killed steel plate price is more expensive.

A514 gr.E quenched and tempered alloy steel chemical composition (melting analysis)%
C: 0.12-0.20, Si: 0.20-0.40, Mn: 0.40-0.70, P max.: 0.035, S max.: 0.035, Cr: 1.40-2.00, Mo: 0.40-0.60, Ti: 0.01-0.10, Cu: 0.15-0.50, B: 0.001-0.005
The mechanical properties in thickness (mm)T≤65
Yield strength (≥Mpa): 690
Tensile strength (Mpa):760-895
Elongation in ≥,%: 18

We have a professional after-sales service team, the company has developed a clear service process and service standards, after-sales service team members strictly perform after-sales procedures, comply with service standards. The most important thing is that we have set up the correct concept of after-sales service, "customer first, sincere service for users".