FAQ

Why the use of a573 gr 65 high strength carbon steel plate is more cost-effective

Why the use of a573 gr 65 high strength carbon steel plate is more cost-effective

  • Jan 21 , 2021
Analyze the advantages and disadvantages of the products against the competitive products. Understand the industry situation and future trend. Understand the a573 gr 65 high strength carbon steel plate product brand positioning appeal point, focus on the

Analyze the advantages and disadvantages of the products against the competitive products. Understand the industry situation and future trend. Understand the a573 gr 65 high strength carbon steel plate product brand positioning appeal point, focus on the crowd and development direction. Understand the layout of each market area, and form a big strategic layout view. Understand the basic operation and assessment standards of work responsibilities. Understand the situation of the cooperative customers.

a573 gr 65 high strength carbon steel plate, Q345B low alloy plate performance:
1) High strength: Generally its yield strength is above 300MPa;
2) High toughness: The elongation is required to be 15% to 20%, and the room temperature impact toughness is greater than 600kJ/m to 800kJ/m. For large welded components, higher fracture toughness is also required;
3) Good welding performance and cold forming performance;
4) Low cold brittle transition temperature;
5) Good corrosion resistance.

a573 gr 65 high strength carbon steel plate, Q345 and Q345B are steel numbers. The differences are as follows:1. Q345 is general and does not indicate the quality level; Q345B is clear and the quality level is B.2. Q345 does not require to inspect the impact performance; Q345B requires that the impact performance at room temperature is qualified (impact at 20 ℃).3. Q345 does not indicate carbon content of steel; Q345B carbon content is 0.20%.Q345 refers to carbon structural steel with yield point (σ s) of 345MPa. The following letters indicate the quality level, including A, B, C, D and E.

We should focus on the main problems to be solved and pay attention to efficiency. After receiving the user's quality objection report data, the possible causes, responsible units, compensation amount, etc. of the problem shall be judged based on experience. To have a clear service plan, to be clear about what your main problem is, what technical support is needed, these should be prepared.

Leave A Comment