2mm 4mm 6mm 8mm 10mm thick A633Gr.D physical properties

The company adheres to the "variety, quality and efficiency" road. We have established a technology center, a brand cultivation management system and a quality control system. Now the company has formed an independent innovation system integrating A633Gr.D physical properties production, learning, research and marketing. Our company has passed ISO9001 quality management system certification and ISO10012 measurement management system certification.

Abrasion resistant steel A633Gr.D physical properties which is also known as (AR steel) wear resistant steel, is developed to have longer service life than mild steel. Abrasion resistant steel is widely used in underground mines, cement industry, road construction, mining and open-pit mining and metallurgical industries and manufacturing other wear-resistant parts.

Just as A633Gr.D physical properties, the boiler steel plate also has strict control of chemical composition for the material, especially harmful elements such as phosphorus and sulfur, and residual elements such as chromium, nickel, and copper; during smelting, good deoxidation and removal of non-metallic inclusions should be carried out to ensure good quality, plasticity and toughness. The organizational structure requires uniformity, and the grain size is controlled within a certain range; there are also strict requirements for surface quality and internal defects. In addition, the boiler steel plate mechanical properties at room temperature and high temperature must be guaranteed.

S355J2 steel plate rolling process is controlled rolling process. In the rolling process, the ingot rolling temperature is 1000-1050℃; in the first stage, the low-speed and large reduction rolling process is adopted, the high-temperature stage is 950-1000℃, the A633Gr.D physical properties rolling speed is 1.6-2.0m/s, the single reduction rate is 15-20%, and the cumulative reduction rate is 40-45%, so as to ensure sufficient deformation of ingot. In the first stage, the start rolling temperature is 910-930℃, and the finish rolling temperature is ≤ 870℃.As a basic building material, steel plates are currently widely used in automobiles, shipbuilding, chemical industry, aerospace and other fields. Reasonable selection of flaw detection methods to ensure the quality of A633Gr.D physical properties steel plates is of great significance to safe production. Common defects of steel plates are folding, inclusion, shrinkage, air bubbles, delamination and cracks. These problems can be discovered in time through flaw detection.

A335 P22 steel pipe belongs to ferrite alloy steel nominal pipe for high temperature use. Chemical composition of A335 P22 steel pipe: C 0.10-0.20, Mn 0.30-0.80, P ≤ 0.025, S ≤ 0.025, Si 0.10-0.50, Mo 0.44-0.65. Mechanical properties of A335 P22 steel pipe: tensile strength 415mpa, yield strength 205 MPa. A633Gr.D physical properties, A335 P22 steel pipe is characterized by good process performance, less sensitivity to the heating temperature of heat treatment, good welding performance, good plasticity, and low strength, especially the high temperature rupture strength is lower than 12Cr1MoV steel. When used at the same temperature and stress, its wall thickness is about 30% thicker than 12Cr1MoV Steel.

After the order is finished, our after-sales service center will send an email to make a feedback about our steel products' quality. We have phone service every three months to remind our customers of the possible problems and collect advices or suggestions in quality and service. Upon the collection of advices or suggestions, our after-sales service will quickly make technical solutions to wipe out the customer problem.