A573gr.65 carbon structural steel shape plate inspection application and performance

The A573gr.65 carbon structural steel shape plate inspection plate products have passed the EU CE certification, and have been recognized by China, France, the United States, the United Kingdom, Germany, Italy, Japan, South Korea and other eight classification societies for high-strength ship plates. The steel strand products have passed the United States (PTI) certification. The A573gr.65 carbon structural steel shape plate inspection products enjoy a high reputation in the domestic and foreign markets. The products are applied to national key projects and sold to 37 countries and regions such as EU, Middle East, Southeast Asia and America.

The boiler steel plate is used to manufacture various boilers and important accessories. Because the A573gr.65 carbon structural steel shape plate inspection boiler steel plate works under the medium temperature (below 350 ° C) and high pressure state, it is not only subject to high pressure, but also to impact, fatigue load and water and air corrosion. The boiler steel plate is required to ensure certain strength and good welding and cold bending performance.Bridge steel plate A573gr.65 carbon structural steel shape plate inspection is used for large railway bridge. The bridge steel plate is required to bear dynamic load, impact, vibration, corrosion resistance, etc.

The main characteristics of A573gr.65 carbon structural steel shape plate inspection, 12Cr1MoV alloy steel plate are as follows:Compared with 12CrMoV steel, 12Cr1MoV alloy steel plate has higher oxidation resistance and thermal strength. The creep limit of 12Cr1MoV steel is close to the stress rupture strength, and it has high plasticity under the condition of long-term tension. The process and weldability of 12Cr1MoV steel are good, but it needs to be preheated to 300 ℃ before welding, and stress relief treatment is required after welding.

The refining process of A573gr.65 carbon structural steel shape plate inspection, wear-resistant clad plate can improve the purity of liquid steel and meet the requirements of continuous casting for the composition and temperature of molten steel, and meet the quality requirements of special steel, ordinary steel and cast steel in industrial production. Because of its simple structure, convenient operation, diversified functions and low investment, it has been widely used and become one of the main out-of-furnace refining methods for smelting pure steel in the iron and steel industry.

The difference between A573gr.65 carbon structural steel shape plate inspection, 10# seamless steel pipe and 20# seamless steel pipe:
1. Chemical composition
Chemical composition of 10# seamless steel pipe: C: 0.07-0.13, Si: 0.17-0.37, Mn: 0.35-0.65, Cr: 0.15, Ni: 0.30, Cu: 0.25. Chemical composition of 20# seamless steel pipe: C: 0.07-0.23, Si: 0.17-0.37, Mn: 0.35-0.65, Cr: 0.25, Ni: 0.30, Cu: 0.25
2. Mechanical properties
10# seamless steel pipe: tensile strength: 335 MPa, yield strength: 205 MPa, elongation: 31%. 20# seamless steel pipe: tensile strength: 410 MPa, yield strength: 245 MPa, elongation: 25%.

Our quality and service commitment: A573gr.65 carbon structural steel shape plate inspection product quality problems, life-long replacement.In the process of using, any time if you find we supplied steel materials not conform to the requirements of technical standards, we can replace it for you free of charge. However, it should be noted that non product quality problems caused by improper use are not covered by the warranty. Please pay attention to the service time commitment as well as the product quality assurance commitment. Because only the products of big brands and reliable enterprises with complete after-sales service system can truly realize the long-term product quality assurance and the whole process of service.