Main characteristics of 12Cr1MoV Steel: compared with 12CrMoV steel, 12Cr1MoV steel has higher oxidation resistance and thermal strength. The creep limit of 12Cr1MoV steel is very close to the endurance strength value, and it has high plasticity under the
Main characteristics of 12Cr1MoV Steel: compared with 12CrMoV steel, 12Cr1MoV steel has higher oxidation resistance and thermal strength. The creep limit of 12Cr1MoV steel is very close to the endurance strength value, and it has high plasticity under the condition of endurance tension; the processability and weldability of 12Cr1MoV steel are good, but it needs to be preheated to 300 ℃ before welding, and stress removal treatment after welding.
12Cr1MoV steel is widely used in Superheater, header and main steam pipe of high pressure, ultra-high pressure and subcritical utility boiler.
There are a lot of ASTM standards for pressure vessel steel plates. Such as ASTM A204, A285, A302, A387, A515, A516, A517, A537, A612, A841, etc. Those ASTM steel plates have different thickness ranges. sa573 gr.70 carbon-manganese-silicon steel plate, ASTM A204 plates shall not thicker than 150mm. ASTM A285 plates shall not thicker than 50mm. ASTM A515 plates shall not thicker than 200mm. ASTM A517 plates and A537 plates shall not thicker than 150mm. ASTM A612 plates shall not thicker than 25mm. ASTM A841 plates shall not thicker than 100mm.
Before delivering our hot rolled plate product we apply various tests to check the quality of carbon steel sa573 gr.70 carbon-manganese-silicon steel plate plates such as- mechanical test, chemical test, hardness test, toughness test, eddy current test, impact test, micro test, flaring test, flattening test, etc. We are provided best packing for structural steel plates to avoid rust. Our after-sales service team will contact you if you have any question.
Leave A Comment