astm 633c carbon steel plates

The company has a group of mature steel plate production and processing line construction and production management experience. In addition, the company has professional and technical personnel. BBN steel is a modern enterprise integrating scientific research and development, production processing, sales and service. The company now has finance department, production department, sales team, technical department, quality control department, logistics department and after-sales service team. At the same time, it also adheres to international standards and adheres to the international line.

A203GrD steel plate belongs to ultra-low temperature container plate. ASTM A203 is a low-nickel alloy steel, including five grades A, B, D, E, and F. Among them, Grades D, E, and F have a nominal nickel content of 3.5%, commonly known as 3.5Ni steel. A203D/E/F steel has good impact toughness and mechanical properties in a low temperature environment, and is usually used in a low temperature environment of -70～-101℃ (the tempered state can reach -107℃).

Q550C steel belongs to low alloy high strength steel. Chemical composition of Q550C steel: C ≤ 0.18, Si ≤ 0.60, Mn ≤ 2.0, P ≤ 0.030, S ≤ 0.030, Nb ≤ 0.11, V ≤ 0.12, Ti ≤ 0.20, Cr ≤ 0.80, Ni ≤ 0.80, Cu ≤ 0.80, N ≤ 0.015, Mo ≤ 0.30, B ≤ 0.004, Al ≤ 0.015. Mechanical properties of Q550C steel: yield strength ≥ 550 MPa, tensile strength 600-780 MPa, elongation after fracture ≥ 16%, impact energy ≥ 55J. astm 633c, Q550C steel is mainly used for manufacturing various large-scale engineering structural components and construction machinery. Due to its high strength, Q550C steel can meet the requirements of large-scale and lightweight construction machinery.

In actual processing applications, the processing astm 633c thickness of flame cutting ranges from 6 to 200 mm, and the astm 633c cutting thickness can even reach 350 mm by replacing the air pipe and cutting torch nozzle. In order to better improve the cutting quality, the related process parameters will be slightly different when using flame cutting for materials of different thickness. The verticality of the cutting surface processed by the CNC flame cutting machine is generally high, and the slope can be controlled below 2-3°. The characteristic is that flame cutting performs better when cutting astm 633c with a certain thickness above 10mm.

We should focus on the main problems to be solved and pay attention to efficiency. After receiving the user's quality objection report data, the possible causes, responsible units, compensation amount, etc. of the problem shall be judged based on experience. To have a clear service plan, to be clear about what your main problem is, what technical support is needed, these should be prepared.

Our company has a comfortable office environment, covers a large area, can accommodate hundreds of people working at the same time. All kinds of green plants are placed in the company, with a healthy office environment. Our company also has gym, table tennis, leisure bar, kitchen, refrigerator, microwave oven and other equipment. Humanized construction provides comfortable office environment for employees.