Every customer who has visit us and witness the steel materials before delievry will be impressed by our quality control departemnt. Even not come to inspect the steel materials before delievry, our quality control departemnt will also send inspection rep
Every customer who has visit us and witness the steel materials before delievry will be impressed by our quality control departemnt. Even not come to inspect the steel materials before delievry, our quality control departemnt will also send inspection report to the customer. For each order, no matter its quantity and value, our quality control departemnt will make strict inspection before delivery, the inspection contents include apperance, tolerance, dimension, mark, special requirements of customers, etc. To guarantee our steel materials sent to the customer is qualified.
40Cr steel belongs to alloy structural steel. SA573 Grade 70 raw material, 40Cr steel has good comprehensive properties, low temperature impact toughness and low notch sensitivity after quenching and tempering on the basis of high-quality carbon structural steel No. 40. 40Cr steel mechanical properties: tensile strength: ≥ 980mpa, yield strength: ≥ 785MPa, elongation after fracture: ≥ 9%, elongation after fracture: ≥ 45%, impact absorption energy: ≥ 47J. 40Cr steel chemical composition: C: 0.37-0.44, Si: 0.17-0.37, Mn: 0.50-0.80, Cr: 0.80-1.10.
Laser cutting SA573 Grade 70 raw material has no burr, wrinkle and precision is high. It is superior to plasma cutting. Laser cutting has good cutting quality, narrow cutting width (generally 0.1-0.5m m), high accuracy (generally 0.1-0.4mm hole center distance error, 0.1-0.5mm contour dimension error), good surface roughness (generally Ra is 12.5-25μm), and the SA573 Grade 70 raw material cutting seam can be welded without further processing. Fast cutting speed: for example, with 2kW laser power, the cutting speed of 8mm thick carbon steel is 1.6m/min.
"In year 2014, we participate Bangladesh national railway tender for steel plate making train carriage. We finally got the order 1000 tons and it took us 40 days to produce all the plates. The client gave very high comments to our service and SA573 Grade 70 raw material product quality.In year 2015, we won another tender for 1200 tons B480GNQR steel coils in Bangladesh, which you can find in the steel coil part."
Leave A Comment