A588 Grade K Steel Vs A573 Gr70 carbon steel

We are world class steel A573 Gr70 carbon steel materials supplier. We are engaed in providing raw steel materials such as steel plates / steel coils / steel sheets / steel pipes, deep processing and a series project design and solutions to clients. We guarantee to return goods for free for A573 Gr70 carbon steel quality problem during its lifetime. Your satisfactory is our permanent pursue. We always welcome advise from clients to make self-improvement continously. And sincerely to build long-term cooperation with you.

For the team, cooperation is the core idea of daily work, and the core of common cooperation is resource sharing. With a perfect resource sharing mechanism, the whole team can be called a unity spirit.A good team lies in the ability to transfer resources, knowledge and information in time among team members in order to achieve the common goals of the team. So that we can share experiences and lessons."

41Cr4 (1.7035) material is an alloy structural steel grade commonly used internationally. Its tensile strength, yield strength and hardenability are all higher than that of 40# steel, but it also has certain defects that its weldability is limited and there is a tendency to form cracks. 41Cr4 steel is generally used for more important quenched and tempered parts, such as parts that work under alternating loads, medium speed and medium load parts.

Boiler steel plates for room temperature and medium temperature (below creep temperature) are mostly carbon steel, including carbon steel, carbon manganese steel, carbon manganese silicon steel, A573 Gr70 carbon steel, etc. They are mainly used in the manufacture of pressure-bearing parts such as boiler drums and header end covers below medium temperature. High temperature (above creep temperature) boiler steel plates are mainly used to manufacture high-temperature pressure-bearing parts such as high-temperature header end caps and steam pipe blocking plates.

"A283C is same as A283 Gr C, A283 grade C. A283C plate technical parameters: A283C plate chemical composition - max. 0.24% carbon, max. 0.40% silicon, max. 0.90% manganese, max. 0.035% phosphorus, max. 0.040% sulphuric, and min. 0.20% Cu. A283C plate mechanical properties: min. yield strength is 205 MPa, tensile strength is 380-515MPa, min. elongation is 22% in 8"" and 25% in 2"". Tolerance of A283C plate is subject to ASTM A6. The density of A573 Gr70 carbon steel, A283C plate is 7.85g/cm3."

If customers have any difficult problems during use of the steel materials, they can contact the company's after-sales service department to feedback the existing problems. The after-sales department will reply as soon as possible to ensure that each customer has a good after-sales experience. Under special circumstances, the after-sales service department will start the problem-solving process, and the engineers in charge of the area will quickly follow up to solve the problem.