High quality ASME SA515 Gr.65 carbon steel sheet from China factory

Chemical composition for A514 Gr A alloy steel:C 0.15-0.21, Si: 0.40-0.80, Mn: 0.80-1.10, P: 0.035, S: 0.035: B: 0.0025, Cr: 0.50-0.80, Mo: 0.18-0.28, Zr: 0.05-0.15
Mechanical properties for A514 Gr A alloy steel:Thickness (mm); Yield strength (≥Mpa); Tensile strength (Mpa); Elongation in 50mm ≥, %T≤65;690;760-895;18

Manganese is used to deoxidize and remove sulfur in steel when making steel. It is an beneficial element in ASME SA515 Gr.65 carbon steel sheet steel. Manganese has a strong ability to deoxidize and remove sulfur, it can eliminate or reduce the hot brittleness caused by oxygen and sulfur, and improve the strength and hardness of ASME SA515 Gr.65 carbon steel sheet steel.

As a basic building material, steel plates are currently widely used in automobiles, shipbuilding, chemical industry, aerospace and other fields. Reasonable selection of flaw detection methods to ensure the quality of ASME SA515 Gr.65 carbon steel sheet steel plates is of great significance to safe production. Common defects of steel plates are folding, inclusion, shrinkage, air bubbles, delamination and cracks. These problems can be discovered in time through flaw detection.

Continuous rolled steel plates and single rolled steel plates ASME SA515 Gr.65 carbon steel sheet are often used in many industries. Although the appearance of these two steel plates is very similar and they are same steel grades, in some respects, they belong to two different plates. Because the continuous rolled steel plate is made of strip steel by uncoiling, leveling and shearing, its ASME SA515 Gr.65 carbon steel sheet comprehensive mechanical properties are not as good as the single rolled steel plate, so some important occasions would choose single rolled steel plate but not continuous rolled steel plate.