Our team is a dynamic, but also mature and steady team. The talents are made of different ages. There are experienced ones, and also creative ones, that also makes our company culture diversified. We have complete department structure, to make the whole w
Our team is a dynamic, but also mature and steady team. The talents are made of different ages. There are experienced ones, and also creative ones, that also makes our company culture diversified. We have complete department structure, to make the whole work procedure run smoothly. For every step, we have special person to be in charge and responsible for our customer and update information to the customer in time. So you just need not worry too much to purchase steel materials from our company.
SA573 Grade 65 specification, 40Cr material is a common machinery manufacturing steel under GB/T 3077-2015 standard. After tempering, it has good comprehensive mechanical properties, good low temperature impact toughness and low notch sensitivity. The hardenability of steel is good. It can be hardened to Ф28-60mm during water quenching and Ф15-40mm during oil quenching. The cutting performance is better, when the hardness is HB174 -229, the relative cutting workability is 60%.
We have 4 typical production lines SA573 Grade 65 specification, which can produce hot rolled Seamless, LSAW, ERW and SSAW pipes. The Seamless pipe production line range is OD 10.3mm-965.2mm, wall thickness 1.0mm-60mm, Annual capacity is 500 thousand tons. LSAW pipe production line range is OD 406mm-1524mm, wall thickness 6mm-50mm, Annual capacity is 150 thousand tons.
The preparation of SA573 Grade 65 specification galvanized steel before welding is the same as that of ordinary low-carbon steel. It is necessary to carefully handle the groove size and nearby galvanized layer. In order to achieve penetration, the groove size shall be appropriate, generally 60 ~ 65 °, with a certain gap, generally 1.5 ~ 2.5mm; in order to reduce the penetration of zinc into the weld, the galvanized layer in the groove can be removed before welding. In the practical work, the centralized beveling, no blunt edge technology for SA573 Grade 65 specification centralized control, two-layer welding process, reducing the possibility of incomplete penetration.
It is a modern high-tech professional enterprise integrating scientific research, SA573 Grade 65 specification production and sales. The company is mainly engaged in the manufacture, installation and commissioning of boiler and pressure vessel, chemical, metallurgical, petroleum and other equipment, as well as SA573 Grade 65 specification process technology development, technology transfer and related technical consulting and technical services.
In 2019, through the concerted cooperation of the enterprise team, the sales volume has grown steadily, and the annual sales volume has exceeded 300 million yuan. For this reason, both the investors and employees of the enterprise have received satisfactory returns. With strong development potential and brand advantages, we have always been committed to "integrity, efficiency, pragmatism, dedication" corporate spirit, dedication to society, and return to the public. From this perspective, the enterprise will have a bright future. In a good environment with strong hardware facilities and excellent management personnel, we can make sure that the company will develop stronger and bigger.
Over the years, the company has strived for perfection, being well-received. By virtue of stable product performance, high-quality engineering effects and perfect service system, we have won the trust of many customers, and our engineering cases and after-sales service systems are spread all over the world. We regularly conduct quality tracking and return visits by phone and email, listen to customers' opinions, and continuously improve service quality.
Leave A Comment