A573 Gr.65 steel and P355N steel comparison stock size

Mo alloy boiler steel plate A573 Gr.65 steel and P355N steel comparison is mainly used for building pressure vessels.The minimum yield strength of SB480M shall be above 275Mpa, and tensile strength of SB480M shall be within 480-620Mpa. For boiler steel plate SB480M with thickness exceeding 38mm shall be normalized when rolling,and belows or equal to 38mm thickness, as rolled is ok. Besides, ultrasonic test is necessary,and high tension, simulated post welded heat treatment shall be chosen by the end users.

A36 plates technical parameters, A36 ms steel sheets datasheet: A36 steel consists of carbon 0.25% max., phosphorus 0.040% max., sulphuric 0.050% max., silicon 0.40% max. and copper 0.20% max. Mechanical properties of A36 steel include yield strength 250Mpa min., tensile strength 400-500Mpa and elongation 20% min. Brinell hardness 119-162 HBW, based on the conversion from tensile strength. Modulus of elasticity (Young’s modulus): 200 GPa (29×103 ksi). Shear modulus: 79.3 GPa (11.5×103 ksi). The density of A573 Gr.65 steel and P355N steel comparison, A36 plates is 7.85g/cm3.

Our quality and service commitment: A573 Gr.65 steel and P355N steel comparison product quality problems, life-long replacement.In the process of using, any time if you find we supplied steel materials not conform to the requirements of technical standards, we can replace it for you free of charge. However, it should be noted that non product quality problems caused by improper use are not covered by the warranty. Please pay attention to the service time commitment as well as the product quality assurance commitment. Because only the products of big brands and reliable enterprises with complete after-sales service system can truly realize the long-term product quality assurance and the whole process of service.